INSTALLATION
12
STEP 4: Connect the Power Source
NOTE:
When power is connected to the motor, the LED under the programming button
housing will flash green to indicate the shade is ready for operation.
■
Refer to the appropriate page based on your order.
➤
For a battery wand, see below.
➤
For an optional satellite battery pack, see below.
➤
For an optional 18V DC Power Supply, see page 14.
➤
For an optional 18V DC Power Supply with daisy-chain connections, see page 14.
➤
For an optional C-size satellite battery wand, see the instructions that came with
the unit.
Battery Wand
Plug the Power Cable into the Battery Wand
■
On the back of the headrail,
connect the power cable (coming
from the shade) into the socket on
the battery wand.
Satellite Battery Pack
Mount the Satellite Battery Pack
■
Decide where you want to attach the wall mount bracket.
A satellite battery pack may be mounted in any orientation.
➤
Make sure the provided cable is long enough to connect
the satellite battery pack and the shade.
■
Mark the screw holes.
■
Drill the screw holes using a
3
⁄
32
" drill bit.
■
Remove the backing from the double-sided tape. Press the bracket into place.
■
Attach the bracket using the screws provided.
■
Position the battery wand so the power cable is easily connected to the socket.
■
Snap the battery wand into the bracket.
Wall Mount Bracket
Socket
Socket
Battery Wand Cover
Slot
Shown:
High Mount Battery Wand Bracket
