INSTALLATION
10
STEP 2: Mount the Battery Wand
■
Refer to the appropriate page based on your order.
➤
For a battery wand, see below.
➤
For an optional satellite battery pack, 18V DC Power Supply, or C-size satellite battery
wand, the shade is installed first – see page 11.
Install the Battery Wand Clips
■
Attach the battery wand clip to the headrail.
■
Hook the battery wand clip onto the back
channel of the headrail.
IMPORTANT:
Position the clip so that the
battery wand will be between installation
brackets.
■
Rotate the clip down until it
snaps into place.
CAUTION:
Do not connect
the battery wand to the
power cable prior to
installing the shade.
Mount the Battery Wand into the Battery Wand Clip
■
Align the battery wand with its
socket toward the right-side
motor end cap.
■
Push the battery wand straight
up into the battery wand clip
until it snaps into place. Check
to make sure the battery wand
is secure.
CAUTION:
Be sure the cable
does not become pinched by
the battery wand clip during
installation. Damage or
overheating of components
could result.
Proceed to “STEP 3: Install the Shade” on page 11.
High Mount
(Standard)
Battery Wand Clips
Low Mount
(Optional)
Socket
Front of
Headrail
Battery Wand
Clip
