INSTALLATION
14
18V DC Power Supply
Connect the Power Supply
■
Plug the power cable from the shade into
the power supply cable.
■
Plug the other end of the power supply
cable into the 18V DC Power Supply.
■
Plug the 18V DC Power Supply into a
standard outlet.
■
Secure the power supply cable using
wire retainers (not supplied). If hiding
the cable behind the shade, make sure
it does not impede the operation of the
shade.
■
Space the wire retainers approximately
15" apart along the power supply cable,
as shown.
WARNING:
Keep cables and
small parts out of the reach
of children. They can wrap
cables around their necks and
STRANGLE
. They can also put
small parts in their mouths and
CHOKE
.
WARNING:
Electric shock and/
or a fire hazard may occur, if not
properly installed.
Proceed to “Testing the Shade” on page 15.
If You Have an 18V DC Power Supply with Daisy-Chain Connections...
The daisy-chain feature allows up to three PowerView
®
motorized shades to be powered by
a single 18V DC Power Supply. However, each shade has its own RF receiver and can operate
independently. The daisy-chain feature is only available with the 18V DC Power Supply option.
With the two-shade configuration shown on the next page:
■
Connect the power cables from each shade to the daisy-chain connector, using an
extension cable of appropriate length from one of the shades.
■
Plug the power supply cable into the connector and the 18V DC Power Supply.
Power Cable
from Shade
Power
Supply
Cable
18V DC
Power
Supply
15"
Maximum
Wire Retainers
