INSTALLATION
15
■
An additional daisy-chain connector and extension cable are used for three shades.
■
Plug the 18V DC Power Supply into a standard outlet.
Testing the Shade
Testing the shade with the programming button will allow you to ensure that the motor and
power source are working correctly.
CAUTION:
When raising the shade for the first time, observe how the fabric stacks. It should
stack evenly. Immediately stop the shade if the bottom rail is not level or the shade starts to
rub against either window jamb. See“Level the Rail(s), If Necessary” on page 21.
■
Press the programming button on the bottom of
the right-side end cap to test operation. If the
shade does not operate, see “Troubleshooting”
on page 22.
➤
Press the button to alternately lower, stop,
and raise the shade.
NOTE:
With Top-Down/Bottom-Up and Duolite
®
shades, the programming button will alternately
lower the bottom rail, lower the middle rail,
raise the middle rail, and raise the bottom rail.
Proceed to “Attach Magnetic Hold-Down Brackets (Optional)” on page 16.
Shade
Power Cable
Extension
Cable
Connector
Power Supply
Cable
18V DC
Power Supply
Programming
Button
Front of
Shade
