Hunter ACC2 Quick Start Manual Download Page 58 | Manualshive

Page: 58 / 60

background image

58

hunter.direct/ACC2help

Decoders Menu

FILTER

The Filter field will normally show All decoders for the selected
output module. It can also be used to select New decoders
(found since the previous inventory), or Lost decoders (those
that are no longer responding since the previous inventory).

COMM %

This indicates how often the decoder responded successfully
to the controller inventory. A low percentage rate may
indicate connection problems (poor waterproof connections,
shorts to earth ground, etc.). If the decoder responded with
a low success rate, it will probably still operate but may need
maintenance to prevent future issues.

UPDATE AVAILABLE

This indicates the status of each decoder’s firmware. The last
update of decoder firmware is stored in the decoder output
module’s memory.

If the decoder firmware is the same as that stored in the
decoder output module, the Update Available column should
show “No.” The decoder firmware is up to date.

When a decoder shows “Yes,” it means that there is newer
firmware in the decoder output module, and the decoder
should be updated (see Update Decoders).

EXPORT INVENTORY

The Export soft key allows you to store the results of the
inventory on an SD card, if present in the controller facepack.
It will automatically suggest the day’s date as a file name, but
you may edit this if desired. Click Export to save the file for
future reference.

REFRESH INVENTORY

This starts a new inventory of all decoder output modules.

CLEAR INVENTORY

This soft key completely removes the existing inventory.

UPDATE DECODERS

You can update all installed decoders via the two-wire paths
with this command, if a new version of decoder firmware is
available and uploaded into the controller.

Station and P/MV decoders are updated separately from
Sensor Decoders. Select the type of update to send, and press
the soft key for update decoders.

Updating the decoders can take up to 20 minutes or more,
and automatic irrigation is not possible while the update is
running.

«
...
56
57
58
59
60
»

Summary of Contents for ACC2





























































Reviews:

No comments

Related manuals for ACC2

Brand: Watts Pages: 2

Brand: Gantner Pages: 56

Brand: D-Link Pages: 113

Brand: D-Link Pages: 146

Brand: Danfoss Pages: 16

Brand: Danfoss Pages: 20

Brand: Daktronics Pages: 5

Brand: Daikin Pages: 12

Brand: Parker Pages: 32

Brand: Rayrun Pages: 4

AeGIS 7000 Series

Brand: PACH & COMPANY Pages: 2

Brand: U-Prox Pages: 3

Brand: Eaton Pages: 10

Brand: Idemia Pages: 29

Brand: SYR Pages: 2

Brand: Elby Designs Pages: 4

Brand: hager Pages: 4

Brand: LAB-EL Pages: 25

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands