26
hunter.direct/ACC2help
Devices Menu
Devices Menu
Devices allows setup of common external devices that the
controller can use. The functions in the Devices menu are
covered in more detail in other sections.
P/MV OPERATION
Set the Location for the P/MV (terminals on the controller
power supply board, or the decoder output module if using
decoder control).
Set the Style, Normally Closed or Normally Open, for the
Pump/Master Valve outputs.
Change Location, if the P/MV is assigned to a decoder instead
of a controller terminal.
Pumps should always be set to Normally Closed to prevent
damage.
The P/MV Delay sets how long the P/MV will remain active if a
station pauses, such as during the delay between stations.
FLOW SENSORS
Flow Sensor setup is covered in detail in the Basic
Programming, Sensors, Flow Sensors section.
SOLAR SYNC®
Solar Sync setup is covered in detail in the Basic
Programming, Sensors, Solar Sync section.
CLIK SENSORS
Clik sensor setup is covered in detail in the Basic
Programming, Sensors, Clik Sensors section. Hunter sensors
are normally-closed, and open when an alarm is active. The
sensor inputs can be changed to normally-open (close on
alarm) when used with other devices.
SENSOR RESPONSE
Sensor Response is covered in detail in the Basic
Programming, Sensors, Flow Sensors section.
A sensor response setting is required for any sensor to be able
to shut off any program in the controller.
