manualshive.com logo in svg

Hunter ACC2, Quick Start Manual

Share
Download
Hunter ACC2 Quick Start Manual Download Page 33

 

Built on Innovation

®

 

33

Advanced Features

RESET MEMORY

Sometimes it is preferable to simply erase the controller, 
to begin again from a clean start. There are several Reset 
options.

All Programming and Devices: 

This erases all programs and 

device setups, but keeps the Flow Totals intact.

This will require completely reprogramming all devices, flow 
setups, and irrigation schedules.

Flow Totals: 

This clears the flow total history and resets all  

to zero.

Check the boxes for the items you wish to clear, and press 
Delete. The controller will ask if you are sure before erasing 
any data.

FIRMWARE UPDATE

ACC2 can be updated whenever a new version of the 
operating system, or any of the internal modules, is released. 
These updates are usually available from the  

hunterindustries.com

 website, or are sent via email. It is 

always advisable to stay current with controller updates.

Copy the update files onto a compatible SD card, and insert in 
the SD card reader.

Select Firmware Updates from the Settings menu. The 
controller will detect and display available updates on the 
card.

Press the soft key for Update, and the files will be copied to 
the controller. Wait until the automatic reboot is complete, 
and the controller will be up to date.

Do not turn off power to the controller or facepack, 
once the update has started. Damage may result.

ACC2 Decoder controllers can also store a new version of 
decoder firmware, if available. Decoders can be updated 
separately via the two-wire path, using the Decoder menu. 
This is not done automatically, and must be selected from the 
Decoder menu (see Update Decoders section).

CONDITIONAL RESPONSE

Conditional Response allows active responses to various 
sensors or other conditions. It can be used to:

• 

Start a station, block, or program based on a sensor input

• 

Switch P/MV outputs based on a switch position

• 

Activate an external light (SOS) to indicate an alarm in the 
controller.

This is explained in more depth in the Conditional Response 
section. This is a very powerful option, and should be used 
with care. 

Read the Conditional Response section on page 

33 before using these features.

Summary of Contents for ACC2





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands