OPERATION
9
Operate the Shading
■
Lower and raise the shading using the control device(s) for your particular installation.
CAUTION:
When raising the shading for the first time, observe how the fabric winds on the
roll. It should wind evenly. If the fabric roll becomes uneven or starts to rub against one end of
the headrail, immediately stop the shading. See the troubleshooting solution for the problem,
“The shading raises or lowers unevenly, the fabric rubs against one end of the headrail, or the
bottom rail is uneven when fully raised.” on page 13.
IMPORTANT:
If the bottom rail stops before reaching the desired bottom or upper position, or
the bottom rail keeps moving after reaching the desired bottom or upper position, see the Travel
Limit procedures on pages 11 and 12.
Further Reference
Refer to the Residential Motorization
Dealer Technical Manual, as well as the
instructions that may have come with
your motor control device(s).
Summary of Contents for Silhouette
Page 1: ...Installation Operation Care Silhouette Window Shadings Hard Wired Motorized Operation ...
Page 18: ...Notes ...
Page 19: ......