Hunter Douglas Silhouette, Installation Operation Care

Page: 8 / 20

INSTALLATION
6
■
Center the installation brackets or extension brackets on your marks and mark where to drill
the screw holes.
➤
A minimum 1" flat vertical surface is required for the installation brackets. Extension
brackets require 1
1
/
4
".
➤
The tops of the installation brackets or extension brackets should be at the desired
height. The brackets should be level and aligned.
CAUTION: The rear of the brackets must be flush against a flat mounting surface. Do not
mount brackets on curved molding.
■
Drill the screw holes using a
3
/
32
"
drill bit.
CAUTION:
Use drywall anchors
when mounting into drywall.
■
Attach the installation or extension
brackets using the screws provided.
IMPORTANT:
The tops of the
installation brackets or extension
brackets must be level with their
front edges aligned.
■
If using spacer blocks, attach the spacer block(s) and
installation bracket to a flat vertical mounting surface
with #6 screws long enough for a secure installation.
IMPORTANT:
Do not add more than 1
1
/
2
" of
clearance using spacer blocks.
IMPORTANT:
The tops of the installation brackets
must be level with the front edges aligned.
1"
Extension
Bracket
1
1
/
4
"
1 1
/
2
"
Maximum
Spacer
Blocks
Longer
Screw