Hunter Douglas Silhouette, Installation Operation Care

Page: 14 / 20

OPERATION
12
Solution
(continued)
Adjust Upper Travel Limit
■
Push the black button in until it clicks into a
recessed position.
■
If the bottom rail stops before the desired
upper position:
Raise the bottom rail to the
desired upper position.
➤
Release the black button by pushing on it.
■
If the bottom rail raises farther than the desired upper position:
Lower the shading until the bottom rail reaches the desired upper position.
➤
Release the black button by pushing on it.
■
If the bottom rail has rotated through the headrail and is now
hanging lower than the desired upper position:
Raise the bottom rail to
the desired upper position.
➤
Release the black button by pushing on it.
IMPORTANT:
If the bottom rail rotated through the headrail, you must
reset the bottom travel limit after setting the upper limit.
■
Lower the shading 12" down from the top, and raise it again to check your
adjustment. Repeat the sequence if necessary.
Depress
Yellow Button
Depress
Black Button