CARE
14
Removing the Shading
■
Move each lever of the installation brackets to the
left to release the shading.
➤
A flat blade screwdriver can be used to move
the lever.
CAUTION:
Be very careful not to tear or
damage any of the fabric.
➤
If the lever is inaccessible or
inoperable, lower the shading until
you can see the underside of the
bracket. Carefully reach a small
flat blade screwdriver behind the
shading to the tab on bottom of the
bracket between the screw holes.
➤
Push the tab away from the shading
and pull the headrail to release it
from the bracket.
■
Carefully pull the headrail to remove it
from the brackets.
■
Disconnect the power wires to remove
the shading from the window.
Cleaning Procedures
Silhouette
®
Window Shadings are made of 100% polyester, which means they are inherently
durable and resilient. However, care must be taken to avoid wrinkling the fabric, particularly
where the vanes meet the facings.
The Palette
®
Fabric-Covered Headrail
■
Spot-clean the headrail using a sponge or delicate cloth, cool distilled water, and a mild
soap solution; handle with care as you would any fine fabric.
Dusting
■
Regular light dusting with a feather duster is all the cleaning is needed in most
circumstances.
Vacuuming
■
Use a low suction, hand-held vacuum for more thorough dust removal.
Forced Air
■
Blow away dirt and debris between the vanes using clean compressed air.
Tab
Installation Bracket
Underside of
Bracket
End Cap
Move Lever to Left
Top View
Summary of Contents for Silhouette
Page 1: ...Installation Operation Care Silhouette Window Shadings Hard Wired Motorized Operation ...
Page 18: ...Notes ...
Page 19: ......
