Hunter Douglas Silhouette, Installation Operation Care

Page: 9 / 20

INSTALLATION
7
■
If using extension brackets, attach an installation bracket
to the underside of each extension bracket using the speed
nuts and screws provided.
Install the Shading
Connect the Wires
WARNING!
Do not plug the power supply into the outlet until you have completed
all the electrical connections. Any live power can give you an electric shock.
■
Connect the wires from the shading to the power wires.
NOTE:
The motor wire must be long enough to reach
the power, but not so long that it could become entangled
with the shading’s moving parts. Trim excess wire.
IMPORTANT:
Always check local electrical codes
before completing any wiring.
CAUTION:
Be sure the wires do not become pinched
by the brackets or headrail during installation. Damage
or overheating of components could result.
Mount the Headrail
■
Peel back the protective covering
from the top of the fabric-covered
headrail. Leave the rest of the
protective covering on the front of
the headrail.
■
Position the shading so that the front
faces you.
■
Slide the headrail into the installation
brackets so the edge of the headrail
is between the lever and the bracket,
as shown.
Power Wire
Screws
Speed Nuts
Headrail
Installation
Bracket
Lever
Slide the Headrail
Between the Lever
and the Bracket