INSTALLATION
18
■
Holding the shade to the window, rotate the shade to align the motor end with the
channels on the bracket before installing the idle end then push the idle end of the shade
onto the bracket.
➤
For dual roller shades,
install the rear shade first.
➤
If the motor end does not line up with the channels.
Remove the shade from the
idle end and rotate the shade until motor is aligned to insert into the motor bracket.
CAUTION:
Do not rotate the motor in the tube manually it will damage the motor.
•
Once motor is aligned, reinstall the idle end of the shade onto the bracket.
■
Slide the shade into the motor bracket until it clicks into place. Refer to the images below
for how to orient your shade. Gently pull back on the shade to ensure it is secure.
CAUTION:
Be sure the power cables are not pinched or caught in the brackets.
Angle Shade
Idle
End
Standard Shades
Motor
End
Standard Shade
Motor
End
Fascia Shade
Motor
End
Dual Roller
Shade
Standard Roll
Bottom
Bar
Paper
Banding
Tube and
Shade
Fabric
Reverse Roll
Angle Shade
Idle
End
Fascia Shades
Angle Shade
Idle
End
Dual Roller Shades
