3
Update Software
Update Software
Your control head model may need a software update to work with the MEGA
360 ICE Imaging transducer. We recommend that you read the following section
completely before starting any software updates.
Software Requirements
• HELIX Series: 2.180 and later
Check the Current Software Version
It is helpful to review the software version number that is currently installed on the
control head and each accessory.
1. Press and hold the VIEW key.
2. Select System > System Status.
3. Confirm the Software Version listed.
Cables:
Your MEGA 360 ICE Imaging transducer comes with the cables required to
connect directly to your Humminbird fish finder. This includes a MEGA 360 ICE power
extension cable, a MEGA 360 ICE transducer extension cable, and a transducer
splitter cable (y-cable), and a heading sensor quick disconnect cable.
Accessories:
For the most current list of compatible accessories, visit our Web
site at
humminbird.com.
Supplies
In addition to the hardware included with your accessory, you will need the
following supplies:
• Philips head screwdriver
• Marine-grade silicone sealant (optional)
Switch:
A battery switch is included with the ICE HELIX and shuttle.
Power:
The MEGA 360 ICE Imaging transducer MUST be connected to a 12 VDC
power supply.
