6
Update Software
Install the MEGA 360 ICE Mount
Use the following instructions to install the MEGA 360 Imaging ICE transducer
mount. It is important to read the instructions completely and understand the
mounting guidelines before you start the installation.
1. Prepare for Installation
1. Supplies: Philips screwdriver.
2. Complete the ICE HELIX Series Shuttle installation before proceeding with
this installation.
3. When the transducer pod is in use, the pod should be completely submerged
below the ice. The transducer pod should not have anything obstructing
the ‘view’ of the rotating beams. If the beams are blocked, confirm that the
transducer is below the ice and move other equipment, such as additional
transducers, if possible.
2. Install the MEGA 360 ICE Mount Base
Use the following instructions to install the MEGA 360 ICE mounting assembly:
1. Slide the cam lock over the MEGA 360 cables and down the pod shaft.
2. Determine the desired height for the ice base, depending on the thickness of
the ice, and close the lever arm to lock the cam lock into position.
NOTE:
The MEGA 360 pod must be submerged below the ice.
3. From the bottom of the ice base, insert the round, black bushing into the
center of the base. You will hear it snap into place.
4. From the top of the ice base, line up the collet with the keyed grooves in the
base and slide it into place.
Update Software with FishSmart
You can use the FishSmart App to download and push software updates directly to
your Humminbird control head or accessory.
NOTE:
Your control head must already be running software release 1.610 and later
to support this feature.
NOTE:
You must first download the FishSmart App and pair your mobile device to
your control head. See the
FishSmart User Manual
for more information.
1. Open the FishSmart App on your mobile device.
2.
Apple iOS:
Tap the System menu icon.
Google Android:
Tap the FishSmart main menu. Select system.
3. Tap Update next to the selected unit. The download progress is displayed on
the screen.
4. Tap Transfer next to the selected unit once the download is complete.
5. Confirm the estimated transfer time.
6. Tap the checkbox to select where to upload the software update (internal
storage, card slot 1, or card slot 2).
7. Tap Transfer. The upload progress is displayed on the System menu in
FishSmart and in the System Status view on the control head.
8. Follow the on-screen prompts on the control head to complete the software
installation.
