1
Introduction
Introduction
The MEGA 360 ICE Imaging kit provides a mounting capability to use your MEGA
360 Imaging transducer on the ice. This manual will guide you through the following
installation requirements for the MEGA 360 ICE Imaging transducer:
• Installing the MEGA 360 ICE Mount and Heading Sensor
• Connecting to the Control Head and Power
• Testing the Installation
Before proceeding with this installation, the ICE HELIX shuttle and
control head should be installed. Refer to the
ICE HELIX Shuttle
Installation Guide
for more information.
Compatibility
Control Heads:
MEGA 360 ICE Imaging is compatible with the following Humminbird
control heads:
• HELIX MEGA G3N and G4N models
NOTE:
You must have a GPS heading sensor (compass) installed in order to use the
MEGA 360 Imaging navigation features.
NOTE:
MEGA 360 Imaging can be shared with all APEX/SOLIX models and HELIX
G4N, G3N and G2N models over Ethernet.
Transducers:
The MEGA 360 ICE Imaging transducer is compatible with the following
transducers:
• Dual Spectrum CHIRP ICE
• HW Dual Spectrum
• HW MEGA DI+
• HW MEGA DI+/MEGA SI+
• Built-in MEGA Imaging transducer on a Minn Kota trolling motor
