9
Installing the ICE Mount
7. Twist to tighten the knob over the collet on the ice base.
Adjust the height of the ice base as needed.
3. Install the Handle
1. Push the nut out of the depth collar.
2. Thread the MEGA 360 cables up through the depth collar and slide the depth
collar down the shaft to the desired height.
3. Place the bolt through the counterbore hole in the depth collar and screw on
the handle.
Hand-tighten only!
TIP:
Orient the handle so it is parallel with the front of the transducer.
rounded part
of transducer
Aligning the Transducer
Assembling the Base
5. Thread the MEGA 360 cables up through the ice base, and slide the ice base
down the pod shaft. It will rest on the cam lock.
6. Thread the MEGA 360 cables up through the knob and slide the knob down
the pod shaft.
Attaching the Knob
