Humminbird 788ci HD DI Operation Manual Download

Page: 63 / 202

Views

Notes about Recording:

•

While recording

, press the EXIT key to exit the Snapshot and Recording

X-Press™ Menu and scroll to a different view. Recording will continue.

•

The

slider bar

at the bottom of the Snapshot and Recording View shows

the recording progress and remaining space on the SD memory card.

•

Pings Per Second:

For maximum performance, keep the Pings Per

Second setting on Auto (see

Snapshot and Recording X-Press™ Menu).

•

Viewing saved Screen Snapshots and Recording Playback

are not

available while in recording mode.

Playback a Recording:

From the Snapshot and Recording
View, press the UP or DOWN
Cursor keys to scroll through the
saved files and highlight a saved
Recording.

Press the RIGHT Cursor key.

Change Playback Settings:

Press the MENU key once to
open

the

Snapshot

and

Recording X-Press™ Menu.

Use the X-Press™ Menu to
adjust the Sonar Recording’s
Sensitivity, Upper Range, Lower
Range, and the Playback Speed.
See

Snapshot and Recording

X-Press™ Menu

for details.

Stop Playback:

Press the MENU key once to
open

the

Snapshot

and

Recording X-Press™ Menu.

Highlight Stop Playback, and
press the RIGHT Cursor key.

“Playback”
indicates the
control head is
playing a saved
recording.

Open the
X-Press™ Menu
to adjust
Playback
settings.

You can also use
Freeze Frame
and mark
waypoints.

Change Playback Settings

Recording File
Information

Highlighted
Recording File

Playback a Recording

Summary of Contents for 788ci HD DI











































































































































































































Search results

Summary of Contents for 788ci HD DI

Reviews:

Related manuals for 788ci HD DI

Brands by name

Popular brands

Humminbird 788ci HD DI, Operation Manual

Search results

Summary of Contents for 788ci HD DI

Reviews:

Related manuals for 788ci HD DI

Brands by name

Popular brands