101
Chart Speed
Settings: 1 to 10, where 1 = Slow, 10 = Fast; Default = 5
Chart Speed
determines the speed at which the sonar information moves across
the display, and consequently, the amount of detail shown.
A
faster speed
shows more information and is preferred by most anglers;
however, the sonar information moves across the display quickly. A
slower speed
keeps the information on the display longer, but the bottom and fish details
become compressed and may be difficult to interpret. Regardless of the Chart
Speed setting, the RTS Window™ will update at the maximum rate possible for
the depth conditions.
Reset XTE
(only when Navigating)
Settings: Press the RIGHT Cursor key to activate.
Reset XTE
is available during navigation. When it is selected, the cross track
error (XTE) will be recalculated from the boat’s current position to the next
waypoint in the route.
For example, when you’ve deviated from a route to navigate around an island,
select Reset XTE to update the unit’s course calculations from the current boat
position instead of from the previous waypoint in the route.
Bottom Range
(Sonar Zoom View only when Bottom Lock is On)
Settings: 10 to 60 feet, 2 to 10 fathoms, or 3 to 20 meters
(International Models only); Default = 15 ft
Bottom Range
allows you to control how much of the water column, measured
up from the bottom, is shown in the Sonar Zoom View. Choose a small value to
see low-lying bottom structure or details of the bottom return. Choose a larger
value to see large structure in deeper water.
NOTE:
It is possible to set the Bottom Range to be greater than the depth. In this
case, you may see surface clutter in a wavy band that mirrors changes in the
depth.
Sonar X-Press
™
Menu
