manualshive.com logo in svg

Humbaur HA 500 Series, Operating Instructions Manual, Page: 37 / 56

Share
Download
Humbaur HA 500 Series Operating Instructions Manual Download Page 37

Operati ng Instructi on Manual 

V 03/2018 

37/56

Driving on (4-wheel vehicle)

Negati ve example: Driving on from an angle

Supports must be placed at the rear to stabilise the 

trailer before the vehicle is loaded or unloaded!

 

►

Drive up the loading ramps in a straight line - not at an 

 

angle from the side.

 

Negati ve example: not driving up centrally

 

►

Drive up the loading ramps centrally. 

 

All wheels on the loaded vehicle should be positi oned 

 

centrally on both loading ramps.

 

►

If necessary, adjust the positi on of the loading ramps to 

 

the required track width. 

Stowing away the loading ramps

H - 93

1

2

Loading ramps sandwiched together

1. 

Loading ramps, laid in one another

2. 

Slot fl ap, open

 

►

Remove the loading ramps from the cargo bed.

 

►

Close the tailgate.

 

►

Place the loading ramps (1) in one another.

 

►

Release and open the slot fl ap (2).

Stowing away the loading ramps

 

►

Carefully slide the loading ramps all the way into the slot.

 

►

Close the slot fl ap and lock it with the safety bolts (right / 

 

left ).

The loading ramps have been stowed away and secured.

Driving on (2-wheel vehicle)

Negati ve example: Pushing on a motorcycle

The loading ramps do not have an edge to guide the 

wheels - risk of slipping / falling over!

 

►

Positi on the second loading ramp beside the fi rst one.

 

Adjust the distance between the ramps according to the 

 

size of the motorcycle!

H - 92

Pushing on a motorcycle safely

 

►

Guide the motorcycle safely up the ramp - walk up the 

 

adjacent rail in parallel.

Heavy motorcycles must be loaded with the help of a 
second person! Observe the maximum load-bearing 
capacity of the loading ramps.

 

Summary of Contents for HA 500 Series

























































Reviews:

No comments