34/56
V 03/2018
Original
Operati ng Instructi on Manual
8.5 Loading ramps (Multi )
Functi onal explanati on
•
Possibility of loading 2-wheel or 4-wheel vehicles
•
Lightweight aluminium loading ramps without edge
•
Size: L=2000 mm x W=200 mm x D=50 mm
•
Own weight: 9 kg / pair
•
For driving on with vehicles fi tt ed with air / rubber tyres
or rubber crawler tracks
Pay att enti on to the safety informati on and operati ng
instructi ons provided by the loading ramp manufacturer.
The load capacity of the loading ramps is not automati -
cally identi cal to the maximum load capacity of the
trailer!
WARNING
Driving on the loading ramps
The loading ramps could be deformed and cause the
trailer to become unstable. The loaded vehicle could
fall / ti p over / suddenly start moving and crush or hit
people.
►
Always couple the trailer to the vehicle and stabilize the
rear end using supports.
►
Do not drive over the loading ramps with a pallet loader
or a mobile lift ing platf orm - their small wheels exert a
high point load.
►
Do not drive over the loading ramps with track vehicles
(steel tracks) and road rollers - they could destroy the
material.
►
Observe the minimum and maximum drive-up height.
►
Before driving on the loading ramps, ensure that they are
secured properly to prevent them from slipping off .
►
If the driver does not have visual contact with the wheels:
Enlist the help of a second person before driving on the
loading ramps.
- Supervision / instructi on from a second person
recommended.
1
2
Multi with loading ramps
1.
Loading ramps (stacked on top of one another)
2.
Slot fl ap
1
2
Bott om view of trailer
1.
Loading ramps, stowed
2.
Holder
Slot fl ap closed (driving positi on)
The loading ramps must be transported in the slot under
the chassis! Loose loading ramps must be secured to
prevent them from ti pping over or slipping.
Drive-up height / angle
1
2
H
max. 16,5 ° / 30 %
517 - 575 mm
Drive-up height
1.
Cargo bed
2.
Straight loading ramp (L=2000 mm, W=200 mm)
The width of the tyre print on the loaded vehicle must
not exceed 180 mm!
Rail width 200 mm - 20 mm = max. 180 mm
Please note!
•
Load and unload the vehicle slowly!
Drive onto the trailer at max. 0.3 m / sec.
Avoid driving at speed and braking as these generate
vibrati ons and drasti cally increase the stresses on the
trailer components.
•
The drive-up height (H) must be 517-575 mm.
It must not be more than the maximum value or less than
the minimum value.
- Risk of trailer breaking if height is below the minimum
drive-up height
- Risk of trailer ti pping if height is above the maximum
drive-up height
•
The loading ramps may only be used on a solid, stable and
level surface.
•
The loading ramps must not be used as a bridge.