manualshive.com logo in svg

Humbaur HA 500 Series, Operating Instructions Manual, Page: 31 / 56

Share
Download
Humbaur HA 500 Series Operating Instructions Manual Download Page 31

Operati ng Instructi on Manual 

V 03/2018 

31/

56

8.3  Aluminium cover on side wall extension

Functi onal explanati on

• 

Transport protected from weather / theft  etc.

• 

Right / left  bracket latch, lockable

• 

Att achment to the side wall extensions

• 

Supported at front, raised at rear

• 

Aluminium cover is held open by two gas struts

 

 

WARNING

Driving with cover open/unlocked!

The cover can spring open while driving and be torn off /deformed 
- risk of accident!

 

►

Do not drive with the cover open/half-open.

 

►

Before driving off , check that the cover is 

 

properly closed and locked.

 

 

CAUTION

Operati ng the cover!

You may catch your hands/body in the cover or bump 
your head while folding the cover down.

 

►

Do not allow the cover to fall shut on its own.

 

►

Use the handle to operate the cover - keep your hands / 

 

fi ngers away from the closing edge.

 

►

Use the pull strap to close the cover and 

 

hold it fi rmly by the handle.

Faulty gas strut!

Where a gas strut is leaking/worn, the cover may fold 
down on its own - risk of being hit!

 

►

When operati ng the cover, ensure that it does not fold 

 

down by itself.

 

►

Secure the gas strut with the piston retainer.

 

►

Have any faulty/worn gas struts replaced by a specialist 

 

workshop.

  

1

2

3

4

kg

max. 60  

Aluminium cover on triple side wall extension (Multi )

1. 

Aluminium cover

2. 

Lateral crossbar

3. 

Latch

4. 

Handle

Do not stand on the aluminium cover!

Do not exceed the maximum load of 60 kg!

  

1

2

3

4

Aluminium cover unlocked / open

1. 

Pull strap

2. 

Gas strut

3. 

Piston retainer

4.  Hinge

Opening the aluminium cover

2

3

4

1

Unlocking latches

1. 

Key

2. 

Lever

3. 

Bracket

4. 

Hook plate

 

►

Unlock the latch using the key (1).

 

►

Pull the lever (2) upwards.

 

►

Release the bracket (3) from the hook plate (4).

1

2

Gas strut secured

1. 

Piston retainer

2. 

Piston

 

►

Swivel the piston retainer (1) on the piston (2)

The aluminium cover is secured against unintenti onal slamming.

Summary of Contents for HA 500 Series

























































Reviews:

No comments