manualshive.com logo in svg

Humbaur HA 500 Series, Operating Instructions Manual, Page: 33 / 56

Share
Download
Humbaur HA 500 Series Operating Instructions Manual Download Page 33

Operati ng Instructi on Manual 

V 03/2018 

33/

56

8.4  Bicycle stand on aluminium cover

Functi onal explanati on

• 

Two pre-assembled crossbars (max. load 60 kg)

• 

Possible to mount 1 to 3 bicycle stands

• 

Safe transportati on of bicycles

 

 

WARNING

Overloading the bicycle stand!

The bicycle stand could break and the bicycle could fall off  - risk 

of accident!

 

►

Observe the maximum load capacity - see label.

 

 

CAUTION

Opening the aluminium cover with a load on top!

The gas struts cannot support an additi onal load - the alumini-

um cover may fall shut unexpectedly - risk of impact / crushing!

 

►

Remove the load, e.g. bicycle, before opening the 

 

aluminium cover.

 

►

Before opening the aluminium cover, make sure that 

 

there are no unsecured goods on top that can slide off .

NOTICE

Overloading of aluminium cover / crossbar!

The aluminium cover may be deformed. Crossbars can break.

 

►

Limit the weight on the crossbar to a maximum of 60 kg.

 

►

Distribute the load evenly across the crossbars.

  

1030 mm

2

1

Example: Mounted bicycle stand

1. 

Lateral crossbar

2. 

Bicycle stand / stand

Transporti ng a maximum of 3 bicycles only permitt ed

using a bicycle carrier!
Other goods such as long materials cannot be transport-
ed on crossbars - no ti e-down opti ons available!

Observe / read assembly instructi ons provided 
by bicycle stand manufacturer.

  

1

2

3

Example: Bicycle mounted / secured

1. 

Bicycle

2. 

Belt

3. 

Adjustable support

 

►

Adjust the adjustable support (3) to fi t the size of the 

 

bicycle (1).

 

►

Lift  the bicycle onto the bicycle stand. If necessary, use 

 

steps or ladder.

 

►

Secure the bicycle frame with the bracket support.

 

►

Screw the rotary handles ti ght.

 

►

Lock the rotary handle - as anti -theft  device.

 

►

Secure both tyres with a belt (2).

Summary of Contents for HA 500 Series

























































Reviews:

No comments