Humanscale MedLink User Manual Download Page 36 | Manualshive

Page: 36 / 57

Humanscale MedLink User Manual Download Page 36

36

5.6.2 REFILLING A PATIENT DRAWER

To open and refill a drawer that is already assigned to a patient, first scan the location bar code to confirm you are in a designated location

for filling drawers, then click on the drawer to unlock it.

Alternately, selecting the drawer without scanning the location bar code displays the following screen with additional patient details in

the center area. Clicking the Open button will then prompt you to scan the location bar code.

5.6.3 ASSIGNING A DRAWER AS STORAGE

A drawer should be assigned a storage drawer when it will be used for storing non-medication items. A storage drawer is less secure

than a patient drawer and once assigned, does not require a bar code scan to open.

Assigning a drawer as a storage drawer follows a similar process as assigning a drawer to a patient.

1.

Begin by following the prompt on the home screen to scan a location bar code.

Ë654183.Î

Fig 22

«
...
34
35
36
37
38
...
»

Summary of Contents for MedLink


























































Reviews:

No comments