manualshive.com logo in svg

Humanscale MedLink, User Manual, Page: 30 / 57

Share
Download
Humanscale MedLink User Manual Download Page 30

30

5.4 ELECTRONIC LOCKING SYSTEM       

During normal operation, rawers are electronically unlocked through the MedLink software:

1. 

 When the drawer is unlocked it will open slightly. Pull the drawer forward to access the contents. Tabs at the rear of the drawer 

prevent the drawer from accidentally sliding all the way out.

2. 

 The drawer can be fully removed by tilting it backward in exactly the same way as when inserting the drawer, and continuing to 

pull the drawer forward.

5.3 DRAWER STATES      

A drawer may be in one of 4 states: locked, selected, unlocked, or open.

• 

Locked: means the drawer is fully closed within the cassette and cannot be opened until the locking mechanism is release through 
a software input, or the cassette is removed and the mechanical override is used.

• 

 Selected: means the drawer has been selected on screen. The drawer remains physically locked by is highlighted on screen for 

further action.

• 

 Unlocked: means the drawer locking mechanism has been triggered, and the drawer has been pushed out far enough that it can be 

removed. From this position, the auto close feature is able to close the drawer and relock it if there is no further user input.

• 

 From the unlocked position, physically pulling the drawer out further means the drawer is now removed. At this point the auto close 

feature will no longer work, and the drawer can be fully removed from the cassette if desired.

Locked state

Selected and unlocked states

Removed state (empty drawer slot)

Summary of Contents for MedLink


























































Reviews:

No comments