Human Touch CITYclub ht3010, Use & Care Manual

Page: 4 / 22

humantouch.com
4 5
ENGLISH
get ready
1. Attach the backrest to the chair base
IMPORTANT:
This step requires two people to prevent injury and/or damage to the backrest.
Unpack the box
Chair Base Backrest
Lumbar Pillow
Backrest pad
Setting up your Human Touch Massage Recliner is easy.
Just slide the backrest onto the chair base, attach the
backrest pad, place the lumbar pillow, and you’re done!
1. Place the new backrest into position on top of the chair base, with the backrest mounting tracks positioned just in
front of the chair base brackets (Fig.1).
2. Pull up on the lower edge of the backrest cover to detach it from the backrest, then flip it over the top of the
backrest (Fig.1).
Backrest bracket
4. Making sure both backrest mounting tracks are aligned with the chair base brackets, lift the backrest to an
upright position and then lower it evenly onto the brackets until the backrest locks in place( Fig.4).
5. Plug in the chair, power it on, then verify that all massage functions are working properly.
Backrest
Chair Base
Track on side of
backrest
Bracket on chair base
(Fig.4)
Backrest cover
(Fig.3)
ENGLISH
3. Push upward on the top of the backrest to lower the bottom of the
backrest until the backrest mounting tracks line up with the chair
base brackets (Fig.3).
Bottom of the backrest
Backrest
Chair base bracket