humantouch.com
10
11
ENGLISH
To keep your product working and looking its best, please follow
these simple care guidelines.
care and
maintenance
Cleaning:
1. Be sure to disconnect the power cord from the electrical outlet before cleaning.
2. Do not use benzene, thinner or any other solvents on your massage chair.
3. Remove dust on the backrest or armrest with a vacuum.
4. If the backrest or armrests become soiled, wipe with a damp cloth, then a dry cloth.
5. Common upholstery cleaners may be used for tough stains.
6. When cleaning the controller or around the power switch, use a dry cloth only. Never use a damp cloth to clean
the controller or power switch.
Fabric Care:
To maintain your Human Touch product in optimum condition, dust it frequently and/or vacuum it with a soft brush vacuum
extension. SofSuede
®
products can also be brushed with a suede brush. Wipe with a slightly damp cloth as necessary. For
tougher stains on non-leather products, use a mild detergent mixed with water. Leather products should be wiped down
occasionally with a leather furniture cleaning solution.
WARNING:
Be sure to test any cleaning solution on a small, inconspicuous part of the product to ensure that the color does not fade prior
to using the solution on the entire product surface.
Maintenance and Repair:
1. The mechanics of this product are specially designed and constructed to be maintenance free. No periodic lubrication
or servicing is required.
2. Your chair should only be serviced by an authorized service center.
Use and Storage Environment:
1. When not in use for a long period of time, we recommend that the chair be covered, the power cord be coiled and that
the unit be placed in an environment free of dust and moisture.
2. Do not store near heat or open flame.
3. Do not leave this product exposed to direct sunlight for long periods of time. This may cause fading or damage.
4. Do not use or store in extreme temperatures; product stored in cold temperatures may require 48 hours at room
temperature to function properly.
5. Product should be used and stored in an environment with non-condensing humidity ranging from 10 to 80%;
excessive humidity will damage the mechanics.
Miscellaneous:
1. Foreign objects should not be inserted between the massage nodes or the unit housing.
2. Care should be taken not to overload the unit.
Operating Voltage:
AC110-120V 60 Hz
Power Consumption:
70 Watts
Chair Size (reclined):
70” L x 34” W x 30” H
Product Weight:
106 Lbs.
Required Recline Clearance: 5”
Maximum Load Weight:
285 Lbs.
*Specifications are subject to change without prior notice.
Specifications*
customize massage
intensity
1. Standing in front of the chair, pull up on the bottom of the backrest pad to detach it from the chair.
2. Flip the backrest pad over the headrest, to the back of the chair.
3. Open the zipper on the underside of the backrest pad.
4. Install or remove the massage-softening pad as desired.
5. Close the zipper.
6. Flip the backrest pad back over to the front of the chair, then smooth it downward to reattach the
bottom edge to the chair.
YOU MASSAGE CHAIR ENABLES YOU TO ENJOY A SOFT, MEDIUM, OR STRONG MASSAGE,
BY PROVIDING A REMOVABLE BACKREST PAD AND MASSAGE-SOFTENING PAD.
Replacement massage-softening pads are available from Human Touch, for an additional charge.
Zipper
Massage-softening pad
To remove or install the massage-softening pad:
For a soft massage, install the massage softening pad into the backrest pad.
For a medium massage, remove the massage-softening pad from the backrest pad.
For a strong massage, flip the backrest pad over the headrest.
