Panasonic EP1014-U1, Service Manual

Page: 1 / 99

ep1014u1.html
Table Of Contents
COVER
1 Components identification
1.1 Massage lounger
1.2 Controller
2 Massage range (movement range of
massage wheels)
2.1 Upward massage, Downward
massage, Kneading rolling, Regional
kneading rolling
2.2 Tapping, Rolling, Regional rolling,
Tapping rolling, Regional tapping
rolling
3 Turning on the power
3.1 Turning on the power
4 Required tools
5 Actual wiring diagram
6 Display method of massage block
total use time and operation time
7 Motion of the clutch and belt based
on various massager operations.
8 Massager up/down detection
gear adjustment method
9 Removing the massage block
9.1 Removing the rear cover
9.2 Removing the massager
10 Disassembly (massager) and
assembly
10.1 Removing the motor
10.2 Removing the tapping shaft
assembly
10.3 Removing the gear box
10.4 Removing the massage wheel
unit set (right, left)
10.5 Removing and mounting the
up/down shaft bolt
10.5.1 Removing
10.5.2 Mounting
10.5.3
Service Manual
TOP NEXT
ORDER NO.HPD0204U00C1
MASSAGE LOUNGER
●
EP1014-U1
SPECIFICATIONS
Power source : 120V AC, 60Hz
Power consumption : 200W
Kneading speed : Approx. 28 times/min.
Tapping speed : Approx. 500 times/min.(per side)
Rolling massage speed : Approx. 1 cycle every 37 sec.
Massaging width : Shoulder/lower back section : Approx. 2-15/16 in. (75mm)
Back rolling width/tapping width : Narrow : Approx. 3-5/16 in. (85mm)/: Wide : Approx. 4-5/16 in. (110mm)
http://202.224.189.178/~sgml/viewing/EP1014-U1/NA/SVC/PVAccel.html (1 of 2) [12/6/2003 9:48:19 AM]