http://202.224.189.178/~sgml/viewing/EP1014-U1/NA/SVC/s1003000000.html
10.3 Removing the gear box
1. Perform removal of steps 1 to 10 of " 10.2. Removing the tapping shaft assembly ".
2. Remove one screw and the Capacitor.
3. Remove the transformer set screw, and remove the transformer and remove the base for
transformer set screw W to Y and remove the base for transformer.
4. Remove the screw Z and Up/down detector P.C.B.
Remove the gear box screws a to d.
5. After removing the screws, the massage clutch, up/down clutch and intermediate gear block can
be removed.
*Take care so that the grease does not stick to the massage clutch and up/down clutch pulleys. If grease
sticks, remove it with alcohol.
*The massage clutch and up/down clutch have similar shapes. The lead wires are the same gray color, so
please choose based on connector color.
http://202.224.189.178/~sgml/viewing/EP1014-U1/NA/SVC/s1003000000.html (1 of 2) [12/6/2003 9:48:56 AM]
