Hughes Thuraya IP+, User Manual

Page: 35 / 61

Thuraya IP+ Satellite Modem User Guide
27
3500799-0001 rev C
LCD backlight configuration: LCD backlighting can be On (15 seconds) ,
Off , or Auto (off after 15 seconds of inactivity unless external DC present).
Streaming Alert: When enabled and a Streaming connection is active,
the Thuraya IP+ warns the user if the connection becomes inactive. An
active connection has both transmit and receive traffic. When the
audio streaming alert is enabled and the session is inactive, the terminal
beeps every 30 seconds. Pressing an iMMI button cancels the alert.
When the visual streaming alert is enabled and the session is inactive,
the terminal flashes the LCD backlight every 10 seconds, unless the
backlight is set to off. With the Streaming Alert control a user can enable
either or both of the audio and visual indicators.
On the web MMI, a streaming timer is displayed
within the modem status box that appears on
the upper left-hand corner of each web page
(see example at right). This indicates how long a
streaming session has been active.
Streaming Activity Monitor: When enabled, the Thuraya IP+ monitors user
traffic during streaming sessions. If the timeout period expires with no
user traffic, the streaming session is cancelled and a standard on-
demand session is requested. The minimum Timeout value is 5 minutes.
This setting has no effect during non-streaming sessions.
M2M configuration: When enabled, the Thuraya IP+
monitors transmit
and receive traffic. If traffic is not seen on either direction for the timeout
duration then the terminal will automatically reboot to ensure it stays
online. The feature will also try to re-establish a PDP context if it is
disconnected for any reason. This mechanism is useful to ensure
continuous operation from unattended sites.
M2M monitor: This is the timeout setting for the M2M feature.
Power-up profile: You can select the power-up profile from a
drop-down list, including standard and three customizable streaming
profiles. Each streaming profile can be customized by name , multimedia
mode, fixed rate mode, transmit rate , and receive rate .
Select the Save button to implement your modifications.
Thuraya IP+ Satellite Modem User Guide
15
3500799-0001 rev C

Software version currently executing

Public network IP address

Private local IP address (Ethernet subnet and wMMI address)
 WLAN local IP address (WLAN subnet)
 Access Point Name (APN) for the satellite connection
 Modem International Mobile Equipment Identity (IMEI)

SIM International Mobile Subscriber Identity ( IMSI)

Ethernet and WLAN Media Access Control (MAC) addresses
S
TATISTICS
S
CREEN
The Statistics Screen provides you with an estimate of your data usage.
Data usage figures are obtained by counting the bytes in the IP packets
received by and sent from the Thuraya IP+ terminal. You can view both
“since power on” (per session) and “cumulative” (lifetime) data usage
counts. To reset the data counters of a session, simply select the Reset
button for either transmit or receive and click the Apply button.
Note : The data usage figures provided on the screen are
estimates only. This feature is not tied into the actual billing
system. Hughes assumes no liability if differences are found
between data usage figures and your actual bill.