Hughes HNS-7100 User Manual Download Page 61

Page: 61 / 76

/Call set

tin

Aler

tat

istics

GPS

cilities

ppe

ndi

If the mobile phone sustains a shock

–

Remove and refit battery and SIM card.

–

Do not dismantle.

If the mobile phone becomes wet (water)

–

Dry the mobile phone off quickly with a
cloth.

–

Do not heat.

–

Dry the contacts thoroughly.

–

Remove and refit the battery and SIM
card.

–

Stand upright in an open space with free
air flow.

–

Do not dismantle.

SIM card does not
accept PIN

– If your SIM card does not accept your correctly entered PIN, con-

tact your service provider.

Voice mailbox is not
working

– Diversion not set. Set call diversion.

Cannot send a message – Message memory full. Delete a message to make room.

– Service provider does not support this service. Check with your

service provider.

– Check if sending of SMS barred (outgoing calls).

– SMS centre and message type not set. Set number of SMS cen-

tre.

– Destination does not have compatible mobile phone. Check.

Cannot set a function

– Not supported by your service provider or registration required.

Call your service provider.

Problem

Possible reasons/Possible measures

Summary of Contents for HNS-7100













































































Search results

Summary of Contents for HNS-7100

Reviews:

Related manuals for HNS-7100

Brands by name

Popular brands

Hughes HNS-7100, User Manual

Search results

Summary of Contents for HNS-7100

Reviews:

Related manuals for HNS-7100

Brands by name

Popular brands