background image

M

A

D

E

 

I

N

 

C

H

I

N

Q

WM

 

1940 V2 

UHF wireless microphone / bodypack systems

863.0 - 865.0 MHz

(

Channel 70

)

  

 

Due to continuous product development, 

 

please ensure that you have downloaded the 

latest instruction manual for this 

product

 

 from the 

Q-Audio website

 

For the latest updates and information on the entir

e Q-Audio

 range visit: 

www.q-audio.co.uk

 Telephone: (+44) (0) 203 598 5164 •  Email: [email protected]  •  Web: www.q-audio.co.uk 

If this product is ever no longer functional please take it to a recycling plant for environmentally friendly disposal. 

Due to continuous product development, specifications and appearance are subject to change.  © Copyright Q-Audio.  E&OE. 

Summary of Contents for QWM 1940 V2

Page 1: ...t from the Q Audio website For the latest updates and information on the entire Q Audio range visit www q audio co uk Telephone 44 0 203 598 5164 Email info q audio co uk Web www q audio co uk If this product is ever no longer functional please take it to a recycling plant for environmentally friendly disposal Due to continuous product development specifications and appearance are subject to chang...

Page 2: ...uired written on the unit The lightning flash symbol inside a triangle is to alert the user to the presence of high voltage within the unit s enclosure that may be of sufficient power to constitute a risk of electrical shock to persons Caution to prevent the risk of electric shock do not attempt to open the unit No user serviceable parts inside Refer all servicing to qualified service personnel Th...

Page 3: ...for mixed 20 Infrared connect window audio output from both channels 21 Compartment for 2 x AA 1 5V batteries 11 DC power supply input socket 22 Battery compartment flip out cover Operation Before operating the system ensure that you have installed fresh new batteries in the mic or bodypack transmitters Receiver operation 1 Connect audio outputs for channel A and B to your mixer amplifier PA speak...

Page 4: ...ceiver and the volume controls on your connected mixer amplifier PA speaker system you should hear the signal coming through and you can adjust the volumes to suit your performance VERY IMPORTANT if you wish to run 2 receivers and 4 transmitters together and to avoid interference between the two systems it is recommended you use the following setup Unit 1 set channel A to frequency 1 and set chann...

Reviews: