Using the Web UI
3500988-0001 Revision A
47
Network Region:
There is only one region for all countries.
Network Channel:
This controls the radio channel number (1
through 11) used by the access point. To meet FCC regulations,
channels 12 to 14 are not supported.
If performance issues occur over the WLAN interface, changing
the Channel may help.
Wireless LAN Security
This page allows the user to configure WEP, WPA or WPA2
Security for use when the terminal is communicating wirelessly
to TEs. Additional security measures that can be used with
encryption to make it more secure are:
1) Do not broadcast your SSID and
2) Enable MAC address filtering so that only the MAC addresses
that you select, can connect to the terminal. A maximum of ten
(10) addresses can be filtered.
Check the box if you want your SSID name to be broadcast.
Select from the down arrow, No protection, 64 bit WEP, 128 bit
WEP, WPA or WPA2.
For 64 bit WEP, define a 10 hex character key.
For 128 bit WEP, define a 26 hex character key.
For WPA and WPA2, define an 8 to 63 character passphrase.
Mac Address Filtering
Check the box to
Enable MAC Address Filtering
If any TE is already connected to the terminal wirelessly, the
MAC address of that TE will be detected and show up in the
Add a Detected Device
field.
