Hughes Network Systems GMH2000, Installation And Maintenance Manual, Page: 28 / 105

2-6 • Installing BSC hardware 8018653 1.1
• Level, 2-foot (or metric equivalent)
• Pallet truck (for moving equipment racks)
• Cable ties and adhesive-backed mounts
2.3
Unpacking the BSC rack
The BSC rack is shipped in one of two configurations (see figure 2-1):
• Configuration 1: The BSC rack is mounted on a pallet and is
protected by a moisture barrier, sleeve, cap, and restraint bands.
• Configuration 2. The rack is mounted on a pallet and is protected
by a moisture barrier and restraint bands.
If your shipment arrived in a configuration #1 container, refer to section
“Unpacking a configuration #1 shipment.” Otherwise, refer to section
“Unpacking a configuration #2 shipment.”
CHAS
SIS
1
CIR
CU
IT B CHA SS
IS 2
CHA
SSIS
3
CH
ASSI
S 1
CIR
CUIT A CHA
SSI S
2
CH AS
SIS 3
Subsidiar
y of
Hughes Aircr
aft
Compan
y
HU
GHE
S
NET
W
O
R
K
S
YS
TE
M
S
CONFIGURATION #1 CONFIGURATION #2
Figure 2-1. BSC rack shipping configurations