![background image](http://html1.mh-extra.com/html/hubsan/h122d-x4-storm/h122d-x4-storm_user-manual_2180935021.webp)
3.4.3 Installing the HS001 display
Option 1: Secure the HS001 display to the
HT015’s mobile device bracket.
19
Before performing a Horizontal calibration, please make sure that all motors are
completely disarmed and that the aircraft is on a completely flat surface.
1. Place the aircraft on a completely flat surface and then follow the below calibration
procedure. Hold the left stick to the right side of its socket. Rapidly and continuously wiggle
the right stick left and right until the rear red LEDS flash alternately.
2. Calibration is complete when the LED indicators stop flashing. It is recommended that
users wait for 15-20 seconds after the calibration is completed before flying again.
Hold the left stick to the right
side of its socket.
Start
Calibration complete
Rapidly and continuously
wiggle the right stick left and
right until the rear LEDS
flash alternately.