![background image](http://html1.mh-extra.com/html/hubsan/h122d-x4-storm/h122d-x4-storm_user-manual_2180935010.webp)
08
2.1.2 HT015 key functions
Battery compartment
Photo key
Video key
Aileron trim
3
Power button
Long press to power the screen on or off. The transmitter status LED will
turn solid upon power on.
4
Binding mode
Hold the Photo key while powering the transmitter on to enter binding mode.
1
Throttle/Rudder stick
Push the stick forward or backward and the quadcopter will ascend or
descend (respectively). Push the stick left or right and the quadcopter will
rotate counterclockwise or clockwise (respectively).
2
Elevator/Aileron stick
Push the stick forward or backward and the quadcopter will fly forwards or
backwards (respectively). Push the stick left or right and the quadcopter
will fly left or right (respectively).
5
Arm/Disarm motors
Pull both joysticks down out and hold the position for 1.5 seconds.
6
7
Photo key
Short press to take a photo.
8
Headlight power toggle
Short press to turn the headlight on; short press again to turn it off.
9
Aileron trim
Short press to trim the Aileron
13
Acro mode
Short press on the throttle (you should feel and hear a click). The transmitter
will beep 3 times and enter Acro mode.
12
Clear Screen key
Short press to clear the screen; short press again to show content.
11
Binding status LED
Not connected: the LED is blue, flashing slowly.
Connected: the LED is blue and upon connection will beep.
14
Sensitivity
Short press on the non-throttle joystick (you should feel and hear a click).
Entering Expert mode: Two beeps indicate that the transmitter is in Expert
mode.
Exiting Expert mode: One beep indicates that the transmitter has exited
Expert mode.
10
Transmitter status LED
Provides information on the transmitter’s status as well as power warnings.
Normally, the LED is solid.
Low power warning: the LED rapidly flashes and the transmitter will beep
continuously.
Video key
Short press to start a video recording; short press again to end itt.
Note: Users cannot take pictures while recording video. Attempting to do so
will end any video recording in progress.
No.
Key/button/Switch
Function