H122D Accessories
H122D-01
Front canopy
Motor case+
Motor mount
H122D-02
Headlight cover+
Rear lamp lens
H122D-04
H122D-07
Camera head
H122D-11
H502-19
5.8G Antenna
H122D-03
Antenna base+
Antenna tube
Rear canopy
H122D-08
H122D PCB motherboard
H122D-12
USB charger
HV002
H122D-06
Carbon Fiber
Racing Frame
Screwdriver
H122D-15
HS001 LCD display
H122D-09
Screw set
H122D-13
HT015 transmitter
Sunshade
HV002 Video glasses
H122D-05
Adjustable camera
mount
H122D-10
Propeller A/B
LCD display charger
22
1. Aircraft and remote control are not pairing
(1)
Check that the aircraft and remote control are both powered on.
(2)
Turn off both the aircraft and remote control. Rebind the aircraft to the remote control
by following the rebind directions on page 7 of this guide.
2. No video on the screen or user is experiencing strong video feed interference
(1)
Check whether there are strong sources of wireless interference (i.e. WIFI, electricity,
radio tower frequencies, etc). If there are any, please change your flight location.
(2)
Rebind the copter to the transmitter, as the 5.8 and 2.4 frequencies might be
interfering with each other.
(3)
Browse through the selection of available 5.8gHz frequencies to find a clean channel.
3. Aircraft/video feed is shaking/shaky
(1)
Check if the aircraft propellers are deformed or broken. Please replace them.
(2)
Check that all aircraft body screws are firmly in place.
(3)
Check whether any motor shafts are broken. Motors must be replaced if the shafts are
broken.
4. Cannot take videos or pictures
(1)
Check to see that the SD card is installed in the aircraft prior to power on.
(2)
Make sure the SD card is Class 10 or higher, contains 16GB or 32GB of storage and
is formatted to FAT32.