10
2.2.3 HS001 key functions
Sunshade recess
5.8 Antenna
Charging status LED
LCD screen
Photo/Video mode
switch button
Record button
Main Menu
Speaker
Binding/Clear
screen button
3
Photo/Video button
Short press to take photos/start and end video recordings.
4
Main Menu key
Short press to enter the Main Menu. Use in conjunction with the +/-
keys to adjust screen brightness/contrast/chrominance/the 5.8GHz
frequency and to check firmware information.
1
Power Switch
Push up/ON to turn on the transmitter. Push down/OFF to turn off.
2
Photo/Video mode
switch button
Photo/Video mode switch button
5
Binding/Clear
screen button
Hold while powering the screen on to initiate a binding. Short press while
the screen is on to clear the screen; short press again to show content.
6
7
TF (Micro-SD) slot
Insert an SD card into the LCD screen’s slot to take and store photos
and video recordings.
8
Charging status LED
While the screen is charging, the LED is a solid red. After charging is
complete, the LED turns solid green.
Micro-USB port
Used for charging and for updating firmware (only when necessary).
No.
Key/button/Switch
Function
2.2.4 Installing the TF (Micro-SD) card
Insert the SD card in the TF card slot located on the display’s right hand side. To eject the SD
card from the slot, push the Micro-SD inwards (it will pop out).