Huawei WS325 User Manual Download

Page: 14 / 74

2 Product Overview

WS325 300Mbps Wireless Router

User Guide

2-4

Issue 01 (2012-10-26)

Indicator

Color

Status

Indicates

Internet

Green



The router is working in routing mode.



The WAN connection is set up and an

IP address has been obtained.



No data is being transmitted.

Green

Blinking



The router is working in routing mode.



The WAN connection is set up.



Data is being transmitted.

Red



The router is working in routing mode.



The WAN connection is set up and no

IP address is obtained.



The router is working in routing mode,

but no data is being transmitted.

Red

Blinking



The router is working in bridge mode.



The WAN connection is set up.



Data is being transmitted.

Off

The router is powered off or no WAN

connection is set up.

WLAN

Green

The WLAN function is enabled, but no

data is being transmitted on the WLAN.

Green

Blinking The WLAN function is enabled and data

is being transmitted on the WLAN.

Off

The WLAN function is disabled.

WPS

Green

A wireless connection is set up between

the router and a wireless client through the

WPS function.
This state lasts 300 seconds.

Green

Blinking The router is attempting to set up a

wireless connection with a wireless client

(such as a computer with a wireless

network adapter installed) through the

WPS function.
This state lasts no more than 2 minutes.

Off

The WPS function is disabled.

Summary of Contents for WS325











































































Search results

Summary of Contents for WS325

Reviews:

Related manuals for WS325

Brands by name

Popular brands

Huawei WS325, User Manual

Search results

Summary of Contents for WS325

Reviews:

Related manuals for WS325

Brands by name

Popular brands