Huawei WS325 User Manual Download

Page: 8 / 74

WS325 300Mbps Wireless Router

User Guide

1 Warnings and Precautions

Issue 01 (2012-10-26)

1-3



Do not trample, pull, or overbend any cable. Otherwise, the cable may get damaged,

causing malfunction of the device.



Before cleaning the device, stop using it, power it off, and then remove all the cables

connected to it.



Use a clean, soft, and dry cloth to clean the device shell. Do not use any cleaning

agent or spray to clean the device shell.

Disposal and Recycling Information

This symbol on the device (and any included batteries) indicates that the device (and

any included batteries) should not be disposed of as normal household garbage. Do not

dispose of your device or batteries as unsorted municipal waste. The device (and any

batteries) should be handed over to a certified collection point for recycling or proper

disposal at the end of its life.

For more detailed information about the recycling of the device or batteries, contact your

local city office, the household waste disposal service, or the retail store where you

purchased this device.
The disposal of this device is subject to the Waste from Electrical and Electronic

Equipment (WEEE) Directive of the European Union. The purpose for separating

WEEE and batteries from other waste is to minimize any environmental impact and

health hazard due to the presence of hazardous substances.

Reduction of Hazardous Substances

This device is compliant with the EU Registration, Evaluation, Authorisation and

Restriction of Chemicals (REACH) Regulation (Regulation No 1907/2006/EC of the

European Parliament and of the Council) and the EU Restriction of Hazardous

Substances (RoHS) Directive (Directive 2002/95/EC of the European Parliament and of

the Council). For more information about the REACH compliance of the device, visit the

Web site www.huaweidevice.com/certification. You are recommended to visit the Web

site regularly for up-to-date information.

EU Regulatory Conformance

This device should be installed and operated with a minimum distance of 20 cm between

the antenna and all persons.

Български:

С настоящето Huawei Technologies Co., Ltd. декларира, че този уред

съответства на основните изисквания и другите разпоредби на Директива

1999/5/EC.

Česky:

Huawei Technologies Co., Ltd., tímto prohlašuje, že toto zařízení je ve shodě se

základním

i požadavky a dalšími souvisejícími opatřeními směrnice 1999/5/EC.

Dansk:

Huawei Technologies Co., Ltd. erklærer hermed at denne enhed er i

overensstemmelse med de obligatoriske krav og andre relevante bestemmelser i direktiv

1999/5/EF.

Nederlands:

Hierbij verklaart Huawei Technologies Co., Ltd. dat dit apparaat in

overeenstemming is met de essentiële eisen en de andere relevante bepalingen van

richtlijn 1999/5/EC.

Summary of Contents for WS325











































































Search results

Summary of Contents for WS325

Reviews:

Related manuals for WS325

Brands by name

Popular brands

Huawei WS325, User Manual

Search results

Summary of Contents for WS325

Reviews:

Related manuals for WS325

Brands by name

Popular brands