VS-EC-H24R&H28R&H29R
User Guide
9 Network Settings
Issue 04 (2013-06-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
173
Figure 9-10
NTP Settings Interface
Step 3
Check the "Enable NTP" checkbox to enable this feature.
Step 4
Configure the following NTP settings:
Interval:
Time interval between the two synchronizing actions with NTP server.
The unit is minute.
NTP Server:
IP address of NTP server.
NTP Port:
Port of NTP server.
Step 5
Click the "Apply" to save and exit the interface.
The time synchronization interval can be set from 1 to 10080min, and the default
value is 60min. If the DVR is connected to a public network, you should use a
NTP server that has a time synchronization function, such as the server at the
National Time Center (IP Address: 210.72.145.44). If the DVR is setup in a more
customized network, NTP software can be used to establish a NTP server used for
time synchronization.
----End
9.2.4 Configuring FTP Server
The FTP can be configured on your DVR to realize dual-directional transmission of
control files over Internet. And the captured pictures of DVR can be uploaded to FTP
server as well.
Step 1
Enter the "Network Settings" interface.
Menu > Configuration > Network