Huawei VS-EC-H24R User Manual Download Page 155

Page: 155 / 248

VS-EC-H24R&H28R&H29R
User Guide

8 Alarm Settings

Issue 04 (2013-06-15)

Huawei Proprietary and Confidential

147

Step 4

Set up arming schedule of the channel.

Select Arming Schedule tab to set the channel's arming schedule.

Choose one day of a week and up to eight time periods can be set within each day, as
shown in Figure 8-4.

Time periods shall not be repeated or overlapped.

Figure 8-4

Set Arming Schedule of Motion Detection

Step 5

Click "Handling" tab to set up alarm response actions of motion alarm.

Step 6

For details, see 8.6 Setting Alarm Response Actions.

Repeat the preceding steps to set alarm schedules for other days. You can also click

Copy

copy an alarm schedule to other days.

Step 7

Click

to complete the motion detection settings, as shown in Figure 8-5.

Summary of Contents for VS-EC-H24R

























































































































































































































































Search results

Summary of Contents for VS-EC-H24R

Reviews:

Huawei VS-EC-H24R, User Manual, Page: 155 / 248

Search results

Summary of Contents for VS-EC-H24R

Reviews: