Huawei SUN2000-10KTLM1 User Manual Download Page 73

Page: 73 / 124

Indicators

Status

Remarks

Description

Blinking at long

intervals (on for 1s

and then off for

1s)

The Smart Dongle

fails to be connected

to a management

system because the

SIM card has no

signals, weak signal

strength, or no traffic.

If the Smart Dongle

is reliably connected,

check the SIM card

signal through the

SUN2000 app. If no

signal is received or

the signal strength is

weak, contact the

carrier. Check

whether the tariff

and traffic of the SIM

card are normal. If

not, recharge the SIM

card or buy traffic.

Blinking red

and green

alternatively

Blinking at long

intervals (on for 1s

and then off for

1s)

No communication

with the SUN2000
– Remove and then

insert the Smart

Dongle.

– Check whether the

SUN2000 matches

the Smart Dongle.

– Connect the Smart

Dongle to another

SUN2000.

Check whether the

Smart Dongle is

faulty or the USB

port of the

SUN2000 is faulty.

----End

SUN2000-(3KTL-10KTL)-M1

User Manual

6 Commissioning

Issue 02 (2020-11-20)

Summary of Contents for SUN2000-10KTLM1





























































































































Search results

Summary of Contents for SUN2000-10KTLM1

Reviews:

Related manuals for SUN2000-10KTLM1

Brands by name

Popular brands

Huawei SUN2000-10KTLM1, User Manual

Search results

Summary of Contents for SUN2000-10KTLM1

Reviews:

Related manuals for SUN2000-10KTLM1

Brands by name

Popular brands