Huawei SUN2000-10KTLM1 User Manual Download Page 34

Page: 34 / 124

NO TICE

● Prepare an anti-theft lock suitable for the lock hole diameter (Ф8 mm) by

yourself. Ensure that the lock can be installed successfully.

● Outdoor waterproof lock is recommended.
● Keep the key to the anti-theft lock properly.

Figure 4-12 Installing an anti-theft lock

----End

4.5.2 Support-mounted Installation

Prerequisites

Prepare M6 stainless bolt assemblies (including flat washers, spring washers, and

M6 bolts) with appropriate lengths as well as matched flat washers and nuts

based on the support specifications.

Procedure

Step 1 Determine the hole positions based on the marking-off template, and then mark

the hole positions using a marker.

SUN2000-(3KTL-10KTL)-M1

User Manual

4 Installation

Issue 02 (2020-11-20)

Summary of Contents for SUN2000-10KTLM1





























































































































Search results

Summary of Contents for SUN2000-10KTLM1

Reviews:

Related manuals for SUN2000-10KTLM1

Brands by name

Popular brands

Huawei SUN2000-10KTLM1, User Manual

Search results

Summary of Contents for SUN2000-10KTLM1

Reviews:

Related manuals for SUN2000-10KTLM1

Brands by name

Popular brands