manualshive.com logo in svg

Huawei S1700 Series, Web User Manual

Introducing the Huawei S1700 Series, a reliable and high-performance network switch designed to meet your business needs. With our Web User Manual, you can easily access detailed instructions for setting up and configuring your switch. Download your free manual now from manualshive.com and unlock the full potential of your Huawei S1700 Series.

Share
Download
background image

S1700 Managed Series Ethernet Switches 
Web User Manual 

5 Service Management 

 

Issue 05 (2012-10-25) 

Huawei Proprietary and Confidential           

Copyright © Huawei Technologies Co., Ltd. 

39 

 

Table 5-2

 

Parameters of Interface VLAN Attributes 

Item 

Description 

Interface Name

 

Display a list of interface.

 

Link Type

 

Indicate VLAN membership mode for an interface (default: 
Hybrid). 

Access: set the port as an Access VLAN interface. The port 
transmits  tagged  or  untagged  frames  on  a  single  VLAN 
only. 

Hybrid: specify an interface as hybrid VLAN interface. The 
port may transmit tagged or untagged frames. 

Trunk:  specify  an  interface  as  VLAN  Trunk  interface.  A 
trunk is a direct link between two switches, so the interface 
transmits  tagged  frames  marked  the  source  VLAN.  Note 
that  frames  belonging  to  the  interface's  default  VLAN  are 
also transmitted as untagged frames.

 

Ingress Checking

 

Determine  how  to  process  the  tagged  frame,  which  is  not 
included in this VLAN. (Default: Enable) 

Ingress filtering only affects tagged frames. 

If  ingress  filtering  is  disabled  and  the  interface  receives  a 
tagged  frame  which  is  not  included  in  this  VLAN,  these 
frames will be flooded to all other ports within this VLAN. 

If  ingress  filtering  is  enabled  and  the  interface  receives  a 
tagged frame, which is not included in this VLAN, then the 
frame will be dropped. 

Ingress filtering does not affect VLAN independent BPDU 
frames,  such  as  GVRP  or  STP.  However,  they  do  affect 
VLAN associated BPDU frames, such as GMRP.

 

Access VLAN 

If the displayed link type is Access, the VLAN ID that the 
interface  belongs  to,  and  the  tagged  or  untagged  frames 
received on the interface will be tagged with the VLAN ID 
(default : 1). The option can only be used when the link type 
is Access. 

Trunk Allowed VLAN 

If  the  displayed  link  type  is  Trunk,  VLAN  ID  or  list  is 
allowed to pass through the interface. This can only be used 
when the link type is Trunk. 

Native VLAN 

The  VLAN  ID  (default:  1)  of  untagged  frame  which  is 
received  on  interface.  If  the  received  frame  is  untagged 
frame, the frame will be added default VLAN ID. This can 
only be used when the link type are Trunk and Hybrid. 

Hybrid Untagged VLAN 

If the link type is Hybrid, the untagged VLAN ID or list is 
allowed to pass through the interface. This can only be used 
when the link type is Hybrid. 

Hybrid Tagged VLAN 

If  the  link  type  is  Hybrid,  the  Tagged VLAN  ID  or  list  is 
allowed to pass through the interface. This can only be used 
when the link type is Hybrid. 

Summary of Contents for S1700 Series





































































































































































































































Reviews:

No comments

Related manuals for S1700 Series

Watchguard AP200 Setup Manual preview
AP200
Brand: Watchguard Pages: 40
Watchguard Wireless Router Quick Start Manual preview
Wireless Router
Brand: Watchguard Pages: 11
D-Link DWR-712 Quick Installation Manual preview
DWR-712
Brand: D-Link Pages: 32
D-Link DIR-456 Quick Installation Manual preview
DIR-456
Brand: D-Link Pages: 28
D-Link DIR-820 Quick Installation Manual preview
DIR-820
Brand: D-Link Pages: 48
D-Link EXO DIR-2660 Quick Installation Manual preview
EXO DIR-2660
Brand: D-Link Pages: 83
D-Link DIR-508L User Manual preview
DIR-508L
Brand: D-Link Pages: 155
IBM BladeCenter Management Module Installation And User Manual preview
BladeCenter Management Module
Brand: IBM Pages: 184
Vaisala TERMBOX-1200 User Manual preview
TERMBOX-1200
Brand: Vaisala Pages: 32
Netis DL4305 Quick Installation Manual preview
DL4305
Brand: Netis Pages: 16
Paradyne Hotwire 8775 MSDSL Installation Instructions Manual preview
Hotwire 8775 MSDSL
Brand: Paradyne Pages: 10
Top RAMS1000 User Manual preview
RAMS1000
Brand: Top Pages: 21
TRENDnet TDM-C400 User Manual preview
TDM-C400
Brand: TRENDnet Pages: 205
Pakedge RT-3100 Quick Start Manual preview
RT-3100
Brand: Pakedge Pages: 8
Ubiquiti 3GStation Professional Quick Start Manual preview
3GStation Professional
Brand: Ubiquiti Pages: 24
Omnitron Systems Technology iConverter GX/F User Manual preview
iConverter GX/F
Brand: Omnitron Systems Technology Pages: 2
Tripp Lite N304-10M Specification Sheet preview
N304-10M
Brand: Tripp Lite Pages: 2
MikroTik hAP lite Quick Start preview
hAP lite
Brand: MikroTik Pages: 5

Brands by name

Popular brands

Load more brands