NO TICE
● You can perform emergency shutdown of the charging module by connecting
pin 11 to the positive pole of the external power supply (9–15 V), and pin 12 to
the negative pole.
● Pin 9 and pin 10 of the DC output connector must be short-circuited.
Otherwise, the charging module cannot be started.
Step 1 Connect the negative and positive DC output power cables.
Step 2 Connect cables.
●
Output connector with welded board on signal pins: Install the external
adapter board (prepared by the customer) on the signal terminal, weld and
secure the board, and then connect the communications cable.
●
Output connector with crimped cables on signal pins: Crimp the
communications cable (prepared by the customer), connect the cable to the
metal socket, and then insert the cable into the corresponding pin of the
output connector.
Figure 4-7 Connecting DC output cables and signal cables (welded)
R100020G1 Charging Module
User Manual
4 Installation
Issue 05 (2021-11-16) Copyright © Huawei Digital Power Technologies Co., Ltd.
28
