Table 2-4 Nixie tube description
Display
Description
Output voltage
● No decimal places. The precision is 1 V when the
voltage ranges from 0 V to 999 V. There is no precision
requirement when the voltage is greater than 999 V.
The minimum displayed value is 000 V and the
maximum displayed value is 999 V.
● Parameters can be set using buttons only in the setting
mode but the settings are not saved upon power
failure.
Output current
● The last digit is a decimal with the precision of 0.1 A.
The minimum displayed value is 00.0 A and the
maximum displayed value is 99.9 A.
● Parameters can be set using buttons only in the setting
mode but the settings are not saved upon power
failure.
Hardware address
● Adr is displayed by default. Hold down the button to
enter the address display screen (static).
● On the setting screen (blinking), flip the first digit to
enter the CCC screen. The default hardware address
127 (decimal) can be restored.
● After the hardware address is modified, the group
number is restored to the default value.
● Parameters can be set using buttons and the settings
are saved upon power failure.
Group number
● GrP is displayed by default. Hold down the button to
enter the group number display screen (static).
● The group number is displayed in decimal format.
● Parameters can be set only under the company
protocol. Setting is not supported under third-party
protocol.
● Parameters can be set using buttons and the settings
are saved upon power failure.
Error code
● The high-order character is displayed as E, and the
middle- and low-order characters are displayed as
digits.
● Parameters cannot be set using buttons.
Startup/Shutdown
● on: startup; oFF: shutdown
● Parameters can be set using buttons only in the setting
mode but the settings are not saved upon power
failure.
Software version
● The value is displayed as digits.
● Parameters cannot be set using buttons.
R100020G1 Charging Module
User Manual
2 Overview
Issue 05 (2021-11-16) Copyright © Huawei Digital Power Technologies Co., Ltd.
12
