Huawei R100020G1 User Manual Download Page 4

Page: 4 / 53

Change History

Changes between document issues are cumulative. The latest document issue

contains all the changes made in previous issues.

Issue 05 (2021-11-16)

Added descriptions about the module ports, input connector directions, and

product replacement.
Added descriptions about the status code display and error codes, and marked

tolerances in the figure showing the installation clearances.

Issue 04 (2021-08-06)

Optimized the illustration about the input connector directions.

Issue 03 (2021-01-18)

Updated the technical specifications, button operations, and power cable

temperature resistance.

Issue 02 (2020-09-03)

Updated the technical specifications and installation requirements.

Issue 01 (2020-06-30)

This issue is the first official release.

R100020G1 Charging Module

User Manual

About This Document

iii

Summary of Contents for R100020G1






















































Search results

Summary of Contents for R100020G1

Reviews:

Brands by name

Popular brands

Huawei R100020G1, User Manual

Search results

Summary of Contents for R100020G1

Reviews:

Brands by name

Popular brands