Huawei Quidway S1700-24-AC Manual Download

Page: 133 / 266

Item

Description

Typical power

consumption

(30% of traffic

load)
● Tested

according to

ATIS standard

● EEE enabled
● No PoE power

consumption

31.6 W

Operating

temperature

0°C to 45°C (32°F to 113°F) at an altitude of 0-1800 m

(0-5906 ft.)

NOTE

When the altitude is 1800-5000 m (5906-16404 ft.), the highest

operating temperature reduces by 1°C (1.8°F) every time the

altitude increases by 220 m (722 ft.).

Short-term

operating

temperature

-5°C to +55°C (23°F to 131°F) at an altitude of 0-1800 m

(0-5906 ft.)

NOTE

When the altitude is 1800-5000 m (5906-16404 ft.), the highest

operating temperature reduces by 1°C (1.8°F) every time the

altitude increases by 220 m (722 ft.).
The equipment can operate beyond the normal operating

temperature range for a short-term period, but the following

conditions must be met:
● The equipment operates at a temperature of over 45°C (113°F)

consecutively for at most 96 hours in one year.

● The equipment operates at a temperature of over 45°C (113°F)

for a total of no more than 360 hours in one year.

● The equipment operates at a temperature of over 45°C (113°F)

for no more in 15 times in one year.

The equipment may be damaged or experience unexpected

exceptions if any of the preceding limits is exceeded.
The equipment cannot start when the temperature is lower than 0°C

(32°F). The maximum distance of optical modules used in these

conditions cannot exceed 10 km.

Storage

temperature

-40°C to +70°C (-40°F to +158°F)

Noise under

normal

temperature

(27°C, sound

power)

< 44.5 dB(A)

Relative humidity 5% to 95%, noncondensing

Operating

altitude

0-5000 m (0-16404 ft.)

S1700 Managed Series Ethernet Switches

Product Description

5 Hardware Structure

Issue 18 (2020-10-23)

Summary of Contents for Quidway S1700-24-AC











































































































































































































































































Search results

Summary of Contents for Quidway S1700-24-AC

Reviews:

Related manuals for Quidway S1700-24-AC

Brands by name

Popular brands

Huawei Quidway S1700-24-AC, Manual

Search results

Summary of Contents for Quidway S1700-24-AC

Reviews:

Related manuals for Quidway S1700-24-AC

Brands by name

Popular brands