Huawei Quidway S1700-24-AC Manual Download

Page: 83 / 266

1 Mode switching button

NOTE

Press this button to change the mode

of service port indicators:
When you press this button once, the

service port indicators change to the

speed mode and show the speed of

each service port.
When you press this button again, the

service port indicators restore to the

default mode and show the connection

status of each service port.
If you do not press this button within

45 seconds, the service port indicators

restore to the default mode. In this

case, the SPED indicator is off.

2 Eight 10/100/1000BASE-T ports

3 Two 1000BASE-X Ethernet ports

Applicable modules:
● GE optical module (the

maximum transmission distance

cannot exceed 40 km)

● GE copper transceiver module
● GPON optical module

NOTE

If a port uses a GPON optical module,

other 1000BASE-X optical ports cannot

be used.

4 Reset button

NOTICE

To restore the factory settings of a

switch, hold down the Reset button for

at least 6 seconds. This operation will

not reset the switch.
To reset a switch, press the Reset

button.
Resetting the switch will cause service

interruption. Exercise caution when you

press the Reset button.

5 AC power socket

NOTE

It is used with an AC power cable.

6 Jack reserved for AC power cable

locking strap

NOTE

The AC power cable locking strap is not

delivered with the switch.

Indicators

The S1720-10GF-2P does not have the PoE indicator. The meanings of other

indicators are the same as those on the S1720-10GW-PWR-2P.

Power Supply Configuration

The S1720-10GF-2P has a built-in power module and does not support pluggable

power modules.

Heat Dissipation

The S1720-10GF-2P has no fans and uses natural heat dissipation.

S1700 Managed Series Ethernet Switches

Product Description

5 Hardware Structure

Issue 18 (2020-10-23)

Summary of Contents for Quidway S1700-24-AC











































































































































































































































































Search results

Summary of Contents for Quidway S1700-24-AC

Reviews:

Related manuals for Quidway S1700-24-AC

Brands by name

Popular brands

Huawei Quidway S1700-24-AC, Manual

Search results

Summary of Contents for Quidway S1700-24-AC

Reviews:

Related manuals for Quidway S1700-24-AC

Brands by name

Popular brands